-
i regularly get this error sequence (i removed my IP address in the error messages)
i am connected to the Solar Edge using a Ethernet connection (not wifi)
Could be a better way to treat this us…
-
I can communicate with a device over UART with the following command in the linux shell:
`echo "abcd" > /dev/ttymxc6`
I am using this UART for RS485 communication. The communication works well o…
-
I tried to write to to holding register via SungrowModbusWebClient 0.3.2 and modified Modbus4mqtt.
Reading input and holding registers is working like a sharm
But writing to holding registers throw…
olili updated
11 months ago
-
I'm seeing fairly flaky behavior; info.py gets some info but then fails:
ReadDeviceInformationResponse(1)
Manufacturer: 'EPsolar Tech co., Ltd'
Model: 'Tracer4215BN'
Version: 'V0…
joeyh updated
4 years ago
-
### Describe the bug
When installing the Solax Modbus adapter, I only get the error messages from the log. I have tried a complete reinstallation with the result shown in the log file.
### Integrati…
-
packages are installed with
sudo pip3 install -U pymodbus pymodbusTCP
but still it not works and means "not found"
using last raspbian
2022-11-13 10:42:20.650 Error: Epever Batt Volt: (…
-
Due to the lack of free UART ports in my setup, I must provide support for running MODBUS over the SPI interface.
It looks like this is possible in principle, but no opensource solutions for MODBUS…
-
Hi there,
struggeling with the initial setup to get all registers (standard ones) working. log is showing error with index out of range.
`2023-09-16 11:20:18 INFO Starting SunGather 0.5.1
202…
-
I'm getting a failure trying to run this for testing... when I run it, I'm getting ModuleNotFoundError: No module named 'pymodbus.client.sync'.
I have already tried re-running 'pip install pymodbu…
-
### System Health details
## System Information
version | core-2024.1.6
-- | --
installation_type | Home Assistant OS
dev | false
hassio | true
docker | true
user | root
virtualenv | false
…