-
Hi,
I ran emulerr on Raspberry Pi and I get this error."
```
emulerr The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific pl…
-
Issue:
---
Error seen while running the config tool from master: `ModuleNotFoundError: No module named 'notebook.auth'`.
```
configure jupyter notebooks
Defaulting to user installation becau…
-
I cant get video feed when using HQ camera in mode 4056x3040. Web page refreshing never ends, seems there is something broken with backend. First two modes works fine.
Hardware :
Raspberry PI 3B+,…
-
### What happened?
My win 11 Laptop is connected to a monitor. I set the monitor as the primary display in the windows settings > system > display
I opened the raspberry pi imager v1.8.5 and moved t…
-
During the installation process, the config tool no longer presents itself when you run either `. ./RasQ-init.sh` or `sudo rasqberry-config`.
```
pi@raspberrypi:~ $ . ./RasQ-init.sh
This scr…
-
I did some tests with Arduino boards of different models with a baudrate of 115200 using the following Arduino sketch:
```
void setup() {
Serial.begin(115200);
}
void loop() {
Serial.println…
-
### Current Situation
hoobs@hoobs:/var/lib/homebridge $ sudo hb-service update-node
ℹ Updating Node.js from v18.15.0 to v20.16.0...
✖ Your version of Linux does not meet the GLIBC version requireme…
-
I want to build a robot with Raspberry Pi 4 and using ROS 2 Humble, but I didn't find information on your github about the robot you are using. I would like to know if you can help with information ab…
-
Issue
---
When running a couple of the notebooks, the following error is presented:
``Import Error /lib/arm-linux-gnueabihf/libm.so.6: version `GLIBC_2.35' not found ( required by /home/pi/.lo…
-
**Is your feature request related to a problem? Please describe.**
I'm always frustrated when I manually have to set-up a Raspberry Pi as a Tailscale relay node.
**Describe the solution you'd li…
renne updated
3 months ago