-
Hi,
I have follow the install procedure illustrated here https://nodered.org/docs/hardware/raspberrypi for wiring-pi module on Raspbian Jessie.
I have also node red installed and I have tested s…
-
Using uptodate berryboot (pi2).
Dual-boot Raspbian and LibreELEC images dowmloaded from berryboot repository.
When I try to enable the experimental OpenGL driver using raspi-config in the terminal, I …
zbyna updated
7 years ago
-
Attempting to launch Jasper via crontab appears to generate a mem leak.
-
Video playback was hanging for me after a few minutes and I was able to resolve it by increasing the GPU memory in /boot/config.txt. This could be added to the install script. gpu_mem=128 seems to wo…
-
```
[Build] [dnsmasq] ---> Running in 0ce69e2cd91b
[Build] [dnsmasq] Get:1 http://archive.raspberrypi.org jessie InRelease [22.9 kB]
[Build] [dnsmasq] Get:2 http://archive.raspbian.org jessi…
-
Hi, thanks for the tool.
I tried to flash raspbian image to a micro-sd card and failed. It seems that godd treats the Driver Letter differently from the Block Device on Linux.
I tried the following:…
-
Hello,
Quelque chose que je ne comprends pas, quand j'active le plugin sur Jeedom, il m'indique un problème dans les dépendances, ce qui est étrange c'est que du coté des logs je n'ai rien de spéc…
-
I tried installing Raspbian Jessie, on the new Raspberry Pi 3 B+. The system did not boot, which I found was due to the old-code base. So, I am not sure if the Jessie option is a good one at this time…
-
I am currently using PS3 Dualshock controller paired with bluetooth, but I can't see this when I list using "hid_enumerate", the device is connected correctly and appear on /dev/input with BT and with…
-
Hi,
I use RPi3 witch librpip (Raspbian Jessie + Pixel).
With :
```
echo 20000 > /sys/class/pwm/pwmchip0/pwm0/period
echo 5000 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle
echo 1 > /sys/class/pwm/p…