-
When i keep my nmea2k bus running and change my PGN's is there a nice way to "push" out changes to the network when i update my program ? currently running with an ESP32. seems to me like my "open" sh…
-
When running the radar plugin in a separate window (floating) the radar image is running as it should and is showing live data. When in docked position the image pauses and only updates occasionally.
…
-
Douwe, can you please review this page and advise regarding any textual changes, removals, additions that are needed?
This is discussing a somewhat generic setup, and perhaps we should also have link…
-
Dear all,
I start to use your library with Teensy 3.6 with the Dual Can transceiver found on Tindie (https://www.tindie.com/products/Fusion/dual-can-bus-adapter-for-teensy-35-36/).
The Flexcan Can…
-
**Is your feature request related to a problem? Please describe.**
Currently there is a [PyPilot](https://github.com/pypilot/pypilot_pi) plugin that allows direct control of the pypilot open source A…
-
When the Boat is entering the arrivalcycle OpenCPN is steering to the next Waypoint.
But when the steering direction has to be changed in RMB and XTE Message it is not done.
effect : the Autopilot w…
-
Hi,
firstly I appreciate so much your NMEA libraries. I was quickly figuring all out, so I can manipulate messages with ease.
Nevertheless I'm working on transmitting Engine Dynamic parameters (P…
-
In opencpn it is possible to connect to a signalK server.
If a signalK server is connected to a raymarine_gateway (nmea to Seatalk convverter), how can I send the raymarine_autopilot_pi data to that…
-
Following discussion with @tvr256 :
> Thinking about it some more, an even better solution would be for MTN to read both variation and deviation from Micronet and include them in the NMEA HDG senten…
-
First, can't tell you how thrilled I am to find this NMEA2000 library and the excellent documentation.
Me, an EE by trade. Do a lot of HW design and play quite a bit with Arduino. I get by with C++.
…