-
I have the Proxmark 3 RDV4 and tried simulation of a legic prime card.
I used the steps
* hf legic dump (I used a MIM1024 card and had to increase timeouts in the client, otherwise reads would fail)…
-
If I run "hf mf sim u XXXXXXXX", "hf mf esave dump1", "hf mf sim u XXXXXXXX", "hf mf esave dump2" the first dump1.eml is correct but the second dump2.eml blocks are all shifted down one row. In dump2…
-
I could not get samyrun on my new RDV4 to read HID cards.
I Debugged it: the card is never read because signalprop.isnoise is always TRUE.
My fix: in common/lfdemod.c, line 1892, replace
if…
-
I was redirected here by Dennis from the Kickstarter messaging board.
**My original Message from 2018/7/31:**
I do have have problem with my proxmark. I followed the update instructions at https…
-
When I flash my brand new pm3-rdv40 with iceman's fork (compiled from git HEAD), `hw tune` reports that the HF antenna works (more than 40V IIRC and 70V for the LF) but when I put a tag in front of th…
-
The Flash_WriteData function doesn't seem to be working while on standalone mode with no connected client. I will try to describe my issue.
I was playing around with the new mem commands that work pe…
-
i've noticed this before but it is very apparent with the rdv4.0 hardware. i'm going to try to explain the issue to see if anyone has any ideas how we can adjust for it automatically without differen…
-
**Describe the bug**
EM Marine card read is broken after last commits.
**Without card attached:**
pm3 --> lf em 410x_read
LF Signal properties:
high..........15
low....…
-
Just wanted to do a shout-out for the new revision of proxmark3, the pm3 rdv4.0
Go and back it up on kickstarter!
https://www.kickstarter.com/projects/1408815241/proxmark3-rdv-40
-
**issuing hf mf chk keys returns nothing**
No output from hf mf chk command, "hf mf chk *1 ?" returns no keys and executes in no time and returns: Time in checkkeys: 0 seconds
RDV3 and pm3-easy …