-
Resol KM1/KM2, DL2/DL3, VBus/LAN, VBus/USB
hass-Deltasol-KM2
Since three days I get this error with my Deltasol.
"This entity is no longer being provided by the deltasol integration. If the entit…
-
**Describe the bug**
Adapter is configured as standard and /dev/ttyACM0 is made availabe through portainer for docker.
First time start of the adapter the data objects are created but afterwards n…
-
Firts of all thanks for your resol/vbus libs and software.
I tried to toolbox today and the install on my Raspberry Pi Zero 2 W with raspian seemed fine.
Then i ran for example the text logger …
-
**Current behaviour**
Currently the tcp-connection-endpoint.js always answers to the commands CHANNEL and PASS with +OK
In the case of the CHANNEL command, this leads to endless connection request …
-
Ein User vom Resol Adapter hat den MX V2. Wie ich jetzt rausgefunden habe, benötigt createOptimizer unter options die Angabe deviceMajorVersion.
Wie kann ich die deviceMajorVersion vom MX Controlle…
-
What would be the most reasonable way to control my Deltasol BX/KM2 via Node-RED?
I run Node-RED in Docker on an Intel x64-based Synology NAS.
I successfully managed to change values on the controller…
-
I am an automatic service that looks for possible errors in ioBroker and creates an issue for it. The link below leads directly to the test:
https://adapter-check.iobroker.in/?q=https://raw.githubu…
-
Hallo Daniel, danke für diese tolle Anwendung.
Ich schaffe es leider nicht, die Anwendung stabil zum Laufen zu bekommen.
Manchmal läuft die Anwendung fehlerfrei und das JSON ist erreichbar. Nach…
-
Using em-simulator example I'm able to get the status of the relay
but is it possible to set the status of the relay?
-
Im IOBroker Resol Adapter (der vom grizzelbee) kann man auch Daten setzen. Das klappt auch gut bei Devices die nur eine Adresse haben.
Der Resol MX hat aber zwei Device Adressen :
0x7E11 und 0x7E2…