-
**Planned improvements for version 1.1.0 (and further)**
This post collects ideas and wishes for for further package releases. This post will be edited as planned functionalities get committed or p…
-
I have a problem to get code from rf remote. I got code when pressing button:
```
pulses: 50 possible protocol: arctech_switch_old
pulses: 50 possible protocol: arctech_switch_old
pulses: 50 pos…
-
I don't know what I did wrong, I followed the tutorial and flashed the Passthrough-firmware to the Sonoff 433Bridge R2 V2.2 (2021.01.19):
```
>python flashScript.py
Available COM ports:
1. COM1 …
-
seb,
i update the code for ibmi plugin this morning, and tried to open a source in repository but this gives an error.
error log code for ibmi:
![image](https://github.com/user-attachments/as…
-
Use MEZZ_IO8 to MEZZ_IO11 to drive Almazny RF switches.
Choose polarity, pull up/down, and OR/NOR/AND logic with shift register OutputOff such that:
1. if MEZZ_IO are not driven the behavior is …
-
"The LT®5538 is a 40MHz to 3800MHz monolithic logarithmic
RF power detector, capable of measuring RF signals
over a wide dynamic range, from –75dBm to 10dBm. The
RF signal in an equivalent decibel-sca…
-
"The LT®5534 is a 50MHz to 3GHz monolithic RF power
detector capable of measuring RF signals over a 60dB
dynamic range. The RF signal in a decibel scale is precisely
converted into DC voltage on a lin…
-
protocol.md mentions that the format for sending signals with broadlink for IR is pairs of on/off durations, however for RF this does not seem to be the case. With my RM4 Pro and observing with a rtl-…
-
In this hypothetical feature:
Maglev tracks would only work/be fast for Maglev Carts.
Maglev tracks require X amount of RF/t in order for Maglev Carts to move.
RF Accelerators would take both …
ghost updated
3 years ago
-
One of the users of this card has reported unstable output of Almazny being unstable (see attached video). The output from the channel should be at 4.7GHz, and corresponding Mirny frequency of 2.35GHz…