-
I use this as my gateway https://github.com/eclipse/paho.mqtt-sn.embedded-c/tree/master/MQTTSNGateway
but it seem my client can't connect to the gateway at all, am I missing something here?
is i…
-
Summary: RMS function in AD9371 Filter Wizard concflicts with existing function in MathWorks Signal Processing Toolbox function, leading to unexpected behavior
--
Problem: The 937x Filter Wizar…
rgetz updated
6 years ago
-
**Describe the problem you have/What new integration you would like**
It seems to me there is no support for a 868 MHz tranceiver to receive and emit custom signals.
**Please describe your u…
-
It may be outside the scope of this project for this, but is there any interest in a "terminal" mode for the transceiver where the UI + hardware is used in conjunction with a remote McHF or other tran…
-
Hi Walter,
Just want to say thanks for sharing your code to receive Somfy RTS signals.
It took me 5 minutes to convert your PlatformIO code to Arduino. Compiled it for an ESP8266 WemosD1Mini and…
-
Hi,
I try to teach-in the NodOn MicroSmartPlug without any success for hours now. I hope you can help.
openHAB: 2.5.3
212 │ Active │ 80 │ 2.5.3 │ org.openhab.binding.enocean…
-
Hello,
I am planning to make FR-8 as per your instructions but I am finding it difficult to source the components as per your list in Bill of Material.
What alternative do I have to carry out …
-
Is it possible to use rpitx for transmitting recorded AIS wav file?
> An AIS transceiver normally works in an autonomous and continuous mode, regardless of whether it is operating in the open seas …
-
It would be possible to use with cheaper UART bluetooth module?
http://www.aliexpress.com/item/4-Pin-Bluetooth-Module/32223775556.html?s=p
-
The PlutoSSR board (70mhz -6ghz) and the red pitaya SDR (0-60 mhz) share "similar" hardware architecture based on the Zyncq 7010.
The red pitaya and the PlutoSDR howebet uses different "front end"…