-
***Things to try before submitting bug report***
read the [troubleshooting guide](https://github.com/RfidResearchGroup/proxmark3/blob/master/doc/md/Installation_Instructions/Troubleshooting.md)
**…
-
My test environment is Ubuntu16.04 + USRP N210 + SBX, the following problems occurred, ask the author for advice.
 into metablocks as follows:
```
// @filetype text/xml…
-
Hi,
First off I want to thankyou for incorporating the ESP into the Arduino IDE!
I have a www.doit.am esp12e devkit module with the motor shield board.
it programs fine with the Arduino IDE. Board es…
-
After flashing a file compiled using Custom.h, the access point does not appear, the STA mode is turned on.
If you compile the normal version, the access point works
I used esp8266
INIT : Boo…
-
i run nfc-list on terminal Mac Yosemite
But the error appears:
```
nfc-list uses libnfc 1.7.1
error libnfc.driver.acr122_usb Unable to claim USB interface (Permission denied)
```
Please guide m…
-
I have a question about method call, I have a RFID reader which I have to use method call to read tag, the method name is ReadTag which is declared like:
```
ReadTag (
[in] ScanData Identifier
[in…
-
The NodeMCU V1.0 (the new one) is showing a RDX2 and TDX2 on the pins D7 (GPIO13) and D8 (GPIO15). Any chance to have a Serial2 for them?
Best regards, you are doing a great work!
https://raw.github…
-
Firstly, when I run the software, it is found that the transmitter does not send any signal and only the receiver is working all the time. The program can only trigger the behavior of transmitting sig…
-
## Bug
### What I did
Install with Developer install script for Buster: cd; rm buster-install-*; wget https://raw.githubusercontent.com/MiczFlor/RPi-Jukebox-RFID/develop/scripts/installscripts/b…