-
Hi,
Every time when i upload the sketch, The COM-port gets disconnected and I get a popup stating the USB-Device isn't functioning like it should.
I hooked it up according to your explanation, but s…
-
Hi,
I'm trying to use the library with a Dragino Lora GPS Hat v1.4 board on a RPi3, with no luck so far (assertion error in set_freq during calibration). Has anyone successfully used this board? Wi…
-
### Problem
The telemetry server on the `ground-station` repo is able to provide a list of available COM ports in its websocket JSON data. This is necessary for starting the server connection to the …
-
Through the admin interface, I can create a device profile with `device_status_req_interval` set to 0. However, when I try to update an existing device profile to set `device_status_req_interval` to 0…
-
I've been getting this error when building on VScode in Windows.
If I build the exact same code in Linux (using command line) it just works out fine.
It happens with PIO 5.0.1 and the latest 5.0.2 d…
TD-er updated
2 years ago
-
**Is your enhancement proposal related to a problem? Please describe.**
Currently the modem implementation connects to a network before booting the main application and stays connected forever.
This…
-
Hello everyone,
I am new to the LoRaWAN technology. I have a KLAX power meter (https://iot-shop.de/produkt/klax), a Kerilink Wirnet iFemtoCell gateway and a Raspberry Pi on which I run the lorawan-…
-
Hi,
I'm using ESPEasy for different purposes and really love it. The only thing what I sometimes need and haven't found so far is the information which plugin is in which collection.
So I made a lit…
-
-
in most places there are different laws for radios,
power levels and frequency you can use on the ground is different from the aircraft ie in the uk its 100mw on 458.5-459.5 for RC but your not al…