-
I am trying to enable SPI on the CM3. The software image I am using has rsetup, so the overlays are managed there. I can imagine it is not really built for the rk3566 but rather the ones that are in t…
-
Connecting a USB touchscreen of the following type work somewhat but the axis are swapped/inverted/flipped on Rock 5B.
In potrait mode as an example swiping down will swipe right. It does not mat…
-
hello,
I tried your program on my rock 5a and it doesn't work
is there anything to activate it?
regards
-
It's "close"-ish, I guess. But still doesn't want to really boot off USB, seems to hang? Not sure, quick braindump.
This is using a hacked up defconfig, starting from the rock5b dtb.
It gets clo…
-
Hi , The latest 12.6 is very stable on the R5S! However, on the Rock5B, it randomly restarts during boot, occasionally enters the system but then freezes. When running `apt upgrade`, it tends to resta…
-
Hi guys,
I have RK3588 board, that you have used in paper as edge device to run on.
I have trained my weights using edgeyolo_tiny_lrelu , converted to ONNX , than to RKNN using rknn-toolkit 1.4
…
-
buildroot no longer supports python2 building - this requires the host machine to install python2 to make.sh.
Can you please migrate to python3 support ?
That would simplify issues reported agai…
-
![image](https://github.com/CNugteren/CLBlast/assets/59483909/ef1f94b8-b317-408c-88cb-46c990b7ff80)
It don't happened in my compute(Intel),but I copy it to rock5b,and there are errors happend after…
-
Hi , I am working on a Banana Pi R2-Pro. I am getting the following error on the serial console at boot:
"...
Trying to boot from MMC2
No misc partition
spl: partition error
Trying fit image …
-
All video codecs, H264, AV1, Mpeg2/4, VP9 plays correctly hardware accelerated with rkmpp (HW).
H265 also plays with rkmpp (HW) codec but in slow motion and video repeating, ghosting.
On Armbian it …
mo123 updated
9 months ago