-
As my title says, I'm not able to use the check interface command on my system.
Here's the error message I get:
`Traceback (most recent call last):
File "/usr/lib/nagios/custom-plugins/./check_…
-
https://zhelin.me/post/7f5bdbb2857e15aa/
在我将家里的主路由改为RouterOS后,始终找不到一个能完美更新内网设备IPv6的脚本,要么是通过EUI64转换的,要么就是端口转发,还有引入第三个设备,用别的语言去做DDNS的更新,这些方案虽然都能实现最终的效果,但无疑是增加了别的成本,RouterOS本身就支持,舍近求远并不是我的风格,但在查找了一周…
-
The underscore become needed since RouterOS command tree overlapped and also used `type` as an argument to RouterOS command recently. This messed by the JavaScript for a bit — since it no longer knew …
-
Is it so that we are missing release with the great fix below?
https://github.com/haakonnessjoen/MAC-Telnet/issues/42
-
### ⚠️ Please verify that this question has NOT been raised before.
- [X] I checked and didn't find similar issue
### 🛡️ Security Policy
- [X] I agree to have read this project [Security Policy](ht…
-
I am having problems with the version of RouterOS 6.49.6 and netmiko 4.1.1 that does not execute the commands correctly. In the version of RouterOS 6.48.6 everything works correctly. The tests were in…
-
See #50 and #48 for more details.
-
zaborona: initializing...
zaborona: connecting...
zaborona: using encoding - AES-128-CBC/SHA1
zaborona: terminating... - wrong OVPN data
zaborona: disconnected
После обновления до тестовой сборки…
-
I'm having an issue where commands that would otherwise work fine are reporting errors when my router has too much data.
A screenshot of the error is below
![too-many-connections](https://github.c…
-
Hi, I'm faced with problem when I try to configure snmpv3 settings fro example using routeros_command
```
task.run(
task=routeros_command,
path="/snmp/community",
command…