-
### Operating System
Others
### Board
RP2040-Zero
### Firmware
Minimal example code which demonstrates my issue:
```c++
#include
#include "pico/stdlib.h"
#include "tusb.h"
#includ…
-
Hi. I have a weird issue. My setup is as follows:
1. Windows pc with vscode and official extension.
2. Pi Zero with openocd server installed.
3. Pi Pico connected to Pi Zero over SWD. The board is …
-
Hello Fabiano, thank you so much for the time and effort put into this library, I have a question related to the avr and rp2040, witch pins (gpio) could or should I use for the zero crossing signal an…
-
Hi, I am new to pulseview and logic analyzers for that matter. I've uploaded the latest firmware to a rp2040 zero board but is not detected by pulseview and the "choose driver" dropdown is empty.
…
-
### Operating System
MacOS
### Board
Waveshare RP2040-Zero
### Firmware
Custom firmware, representative sample that reproduces the issue at https://github.com/cbrunschen/tinyusb_rp2040_print_devi…
-
hello,
No issue, but I would like to contact you about this project.
I try to understand what you done, but without any success.
My project is based on a RP2040 Zero with Arduino IDE.
I have 3 Pro…
-
Testing a 1.5MByte file
```
dd if=/dev/zero of=test.bin bs=1500000 count=1
```
and using the Picoprobe setup (two Picos, one flashed with https://github.com/raspberrypi/picoprobe, latest 1.0.3 f…
-
I've tried solving this problem myself to no avail, couldn't find anything on the internet regarding this issue. Checked all of my solderjoints, perhaps I'm missing a library or a driver of some sorts…
D3iv updated
4 months ago
-
I've created a small keyboard using the RP2040, utilizing the code from hid-keyboard. This keyboard has been successfully tested on every other computer in the office, including:
- Linux: Debian Si…
dwSun updated
3 months ago
-
your work looks great and hatsoff to you and your team .i need to assign different pin for scl and sda so can you include a line to change the pin number.thanks in advance and have a great day