-
Here is what it looks like right now. It should give you a quick idea of things that have changed since you last looked.
Recent changes:
2023-02-15 - added Panda Wireless® PAU0B (AC600) to the m…
-
I'm running into some weird pauses that don't look like network congestion. If I start transmitting at say MCS0, sending 1,500 byte packets, a new packet is sent roughly once per millisecond. This i…
-
I was successfully (or so it reported) able to run the dkms auto install. Afterwards lsusb reports.
pi@raspberrypi:/usr/src/rtl88x2bu-git $ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation…
-
The Realtek RTL8822bu is listed in your table with a USB3 / 5 Gbps Interface.
According to www.realtek.com/en/products/communications-network-ics/item/rtl8822bu the "Host interface" is "USB2.0 fo…
-
Hi, I'm using Xubuntu 22.04 LTS, kernel version 6.2.0-39-generic. I have a TP-LINK Archer T3U, theorically based on the chipset Realtek RTL8812BU.
Here's my output for
```shell
lsusb
```
---
…
-
Hello,
After installing the driver the monitor mode does not work in the 5ghz network.
How can I remove everything and remove everything that has been executed?
Cheers
-
Hey,
i'm trying to use my RTL8812BU WiFi USB Adapter to set up an AP with Wi-Fi RTT support using hostapd. According to various sources, like [this one](https://www.netspotapp.com/what-is-wifi-rtt.…
-
Hello, For a long time this method works, although I had to repeat the installation of the drivers from time to time, the WiFi card stopped working.
But now, when I try to reinstall, an error pops up…
-
![image](https://user-images.githubusercontent.com/121157513/229266062-23561c58-0751-429e-92d2-6a4770e43d9f.png)
我想用你们的hansomemod的openwrt在 UFI001c上跑
我外接的拓展坞 想用rtl8812bu无线网卡和rj45网口 ,然后自己编译出来,没有你们主题又学…
-
I connected ipTime A3000UA to my sandbox machine by using this driver source code, I tried to test to connect hostapd-running machine and my mobile phone in number of times. A3000UA is using USB 3.0 p…