-
The plugin seemingly depends on librtlsdr, the Debian packaging of https://github.com/osmocom/rtl-sdr. This causes problems with the new plugin installer since users manually must install the Debian …
-
It start to happens last week. First I thought this is just random disconnection, but now this error happens for at least 4 times, so there is something wrong...
I'm using rtl-sdr-blog driver for…
qrp73 updated
5 months ago
-
When I run the rtl-sdr config file, the content of which is given in gnss-sdr.org, I get the following error. My laptop is able to recognise the sdr but I still get this error. Please help me with thi…
-
Hi, I've just released the RTL-SDR Blog V4 (https://www.rtl-sdr.com/rtl-sdr-blog-v4-dongle-initial-release/) which is based on the R828D tuner chip. But the hardware is slightly different as it uses a…
-
I have some raw IQ files (i.e. 2 x uint8 interleaved) output by rtl-sdr for a propagation experiment during the recent solar eclipse and I would rather like to use the backend of rtl-power-fftw to rea…
-
When trying to run as a service I get this error
`Failed to initialize gain for device #-536870912: error -1071395636
`
When I check the status of the service
-
Hi,
Very useful software, but would it be possible to add an option to select the RTL I or Q inputs in addition to the 24-1300MHz tuner input ?
The popular RTL-SDR V3 will support direct samplin…
G8JNJ updated
5 months ago
-
I want to add a GPIO interface to the Soapy RTL-SDR driver. I'm designing an automatic antenna tuner that I want to control using the GPIO pins on the RTL-SDR.
The Blade RF Soapy driver has a [GPIO …
-
I get this error in the last version of raspbian
pi@raspberrypi ~/RTLSDR-Airband $ make
as -o rtl_airband_asm.o rtl_airband_asm.s
g++ -O3 -mcpu=arm1176jzf-s -mtune=arm1176jzf-s -march=armv6zk -mfpu=…
-
```
$sudo systemctl status dump978-fa
● dump978-fa.service - dump978 ADS-B UAT receiver
Loaded: loaded (/lib/systemd/system/dump978-fa.service; enabled; vendor preset: enabled)
Active: a…