-
Hi, thanks for providing this API. Any chance it will be updated for full support of the multiple sensors in the Meater 2 Plus probes? Thanks!
-
Hello,
i'm currently struggling to get my sht30 sensor up and running. I bought [this sensor](https://www.adafruit.com/product/4099) and i'm following [this guide](https://learn.adafruit.com/adafru…
-
Hi all,
I am currently digging deeper into the EV3 sensor protocol. During this, I have found a disagreement between the UART sensor documentation and what I can observe. In particular, the documen…
-
Hello, I can't get a connection
I use the Manta M8P and since the pins
sda_pin: PC9
scl_pin: PA8
Firmware is flashed and the version is: v0.12.0-316-g96cceed23-dirty
the sensor is v1.3
d…
-
The MJPEG video feed (or should I say HDMI input) works as long as the resolution is constant. But when the resolution changes, the HDMI indicator on the OLED screen goes out and I get either a black …
-
Log: [dmesg.6.5.0-20240409-oem.failed-to-check-hwcfg.txt](https://github.com/user-attachments/files/15581712/dmesg.6.5.0-20240409-oem.failed-to-check-hwcfg.txt)
```
[ 5.142286] ov01a10 i2c-OVTI01…
-
**Is your feature request related to a problem? Please describe.**
I write examples for a sensor code, running on an embedded board. These take a few seconds to run, and I'd like to return control …
-
I was able to add a custom OS and discovery to get both temperature and humidity to librenms
2 files are needed. 1 in %librenms_directory%/includes/definitions/axeeffect.yaml
```
os: axeeffect
t…
-
I'm running RatRig V-Core4 500 with a Orbitool board. I keep getting lost communication error. I've tried multiple toolboards, USB pcbs, and cables. I ordered 3 toolboards, so I had 1 for IDEX an…
-
### Checklist
- [X] I have filled out the template to the best of my ability.
- [X] This only contains 1 feature request (if you have multiple feature requests, open one feature request for each feat…