-
During the configuration of deal.II, the setup complains that Trilinos MueLu is found but not working. Therefore, the AMG MueLu Preconditioners are not compiled.
I found this issue today with deal.II…
-
So I have some Apple Brand 820-0071 Serial adapters. From everything I have read they are identical to the onboard Serial of the Apple III Mainboard. So the way I see it, can we add the option to the …
-
I run two waveshare adapters on one raspberry pi and noticed that the assignment of the device address after a reboot is random. This is unfortunate as the assigned hardware might get swapped after a …
Phi2k updated
5 months ago
-
Hello! I have an interesting issue that I am not sure how to resolve or debug.
Hardware: Macbook Pro M3 MAX
Architecture: aarch64 (apple silicon)
OS: Mac OS 14.4.1 (23E224)
I have 2 serial ada…
-
Hello,
This may not be an issue per-se, but I am treading into unfamiliar grounds and could use a little clarification. I find that MIDI -Serial program 'should' help with my situation, although I am…
-
Providing some way for device adapters to determine how many bytes are in the RX serial buffer would be very useful. Currently, as far as I'm aware, there is no way to determine if a command may be wa…
-
Thanks for sharing your code! I'm unsure about the correct setup, could you help?
The way I understand your code is that I connect two USB serial adapters. One is connected to the heater and one to…
-
### The problem
in `/homeassistant/generated/usb.py` there are some entries for VID/PID combo's that identify USB dongles with a specific integration.
For Z-Wave JS this is included in the file:
…
-
Hi.
I have own CAN hardware and successful support for serial-to-CAN (SLCAN) interface like VSCOM adapters (for example, monitor CANHacker work fine).
Can I (and how) write plugin for BUSMASTER for…
kv193 updated
7 years ago
-
**Describe the bug**
On boot, sometimes the printer hangs if you have a UART adapter connected
**To Reproduce**
Steps to reproduce the behavior:
Connect UART adapter
Boot printer
Hope it hangs…