-
This issue lists the status of all tests for the [Release Candidate 3 of the 2023.10](https://github.com/RIOT-OS/RIOT/releases/tag/2023.10-RC3) release.
Specs tested:
- [ ] [01-ci](https://github.com…
-
These sensors seem to have quite a bit in common.
The commands and resolution they use look the same:
- [Si7021 datasheet](https://www.silabs.com/documents/public/data-sheets/Si7021-A20.pdf)
- [SHT…
-
This issue lists the status of all tests for the [Release Candidate 2 of the 2024.01](https://github.com/RIOT-OS/RIOT/releases/tag/2024.01-RC2) release.
Specs tested:
- [ ] [01-ci](https://github.com…
-
As soon as I add #define P016_P035_Extended_AC to custom.h, I get a compile error:
'StaticJsonDocument' was not declared in this scope
my Custom.h:
```
#ifndef ESPEASY_CUSTOM_H
#define E…
-
This issue lists the status of all tests for the [Release Candidate 2 of the 2023.10](https://github.com/RIOT-OS/RIOT/releases/tag/2023.10-RC2) release.
Specs tested:
- [ ] [01-ci](https://github.com…
-
After flashing a file compiled using Custom.h, the access point does not appear, the STA mode is turned on.
If you compile the normal version, the access point works
I used esp8266
INIT : Boo…
-
Hi!
Is it possible to add Sensirion SHT4x (SHT40, SHT41, SHT45) I2C Temperature and Humidity sensor in ESPEasy?
Libraries and docs:
https://github.com/Sensirion/arduino-sht
https://github.com/Se…
-
This issue lists the status of all tests for the [Release Candidate 1 of the 2023.10](https://github.com/RIOT-OS/RIOT/releases/tag/2023.10-RC1) release.
Specs tested:
- [ ] [01-ci](https://github.com…
-
This issue lists the status of all tests for the [Release Candidate 5 of the 2023.07](https://github.com/RIOT-OS/RIOT/releases/tag/2023.07-RC5) release.
Specs tested:
- [ ] [01-ci](https://github.com…
-
I tried to run the example.py, it worked well at the beginning, but suddenly facing the error `SHT1X failed to properly receive command [['WriteStatusRegister'] - 00000110]`, and stopped working.
the…