-
Hello,
I am relatively new contributor, and I am looking to add support for the SHT4X temperature and humidity sensor. I have a branch that is a work in progress here: https://github.com/linguini1/…
-
Hi,
i am currently using this in a stm32wb project.
So the sensor is hooked up correctly and i am able to communicate with it.
But for some reason the Humidity the sensor reports is 30% higher …
Exeu updated
3 months ago
-
### Description / Steps to reproduce the issue
The I2C tool on the Raspberry Pi Pico is incorrectly showing responses on every other address despite not being
connected to any I2C bus.
```conso…
-
Not having access to a 3D printer myself, I have submitted the case (and wall mount) designs to a 3D print house to have them make the parts for me.
The wall mount passes their tests without issue,…
-
Hello. I've applied your 4.0.7 release to my Airgradient DIY PRO v4.2 board with all components.
When I using airgradient's software every sensor data was visible but 4.0.7 isn't.
Only what I did i…
-
### Question
I'm checking [this](https://github.com/espressif/esp-zigbee-sdk/tree/main/examples/esp_zigbee_sleep/light_sleep) example, accroading to the [example output](https://github.com/espressif/…
-
Hey Chill, first thanks so much for putting all this out for everyone! Question on the Pb.hub code, i see you list option to use switch or binary sensor, is it possible to hook up one of the sht4x sen…
-
Hello.
I purchased ENVⅣ and connected M5stackBasic2.7 to ENVⅣ with a gorve connector.
I am writing and testing the sample program ENV4.ino, but SHT4X is not output.
There is no output of "Couldn't …
-
### Category
Other
### Hardware
Rak4631
### Firmware Version
2.5.8.2ba72c15
### Description
When trying to compile customized firmware (using a fresh clone of the master branch) for a device _b…
-
UPD: major improvements were introduced in version 1.0.3