-
Hi Hugen.
I'm working about the odd harmonics loss of dynamic when a LPF filter let pass signal in the fundamental band below 300MHz and cuts in the odd harmonics bands above 300MHz.
I already desig…
-
Hello,
I'm using Si5351A and trying to change drive strenght, but with no effect.
Arduino compiles the code, everything is fine, but on RF meter I don't see the change.
Here is the initializati…
-
Error at compilation:
"Multiple libraries were found for ..."
for all the libraries that the sketch is using.
I checked if there was multiple libraries by searching in the explorer. The only du…
-
Tru undestand how config I2C bus
```
static const I2CConfig i2ccfg = {
0x00300506, //voodoo magic 400kHz @ HSI 8MHz
0,
0
};
```
Refer manual for I2C_TIMINGR register not get this value f…
-
Line 216 in "adafruit_si5351.py" currently says:
assert 0 < denominator < 0xFFFFF # Prevent divide by zero.
Which is an attempt to throw an assertion when the denominator is zero, or out of bou…
-
Hi:
Just came across your distribution. I've been looking for something like this. I want to use an si5351 with a RPi 3B+ on a homebrew SDR transceiver project. I would need two outputs in quadrature…
-
Hi Mr. Black,
Firstly, thank you for that unique and well thought menu system. The fact that each menu item can call a function to adapt to the user needs and all sorts of displays makes your menu …
-
How about supporting what firmware and bootloader you wrote and publish?
"Sorry - no aupport for illegal clones.
73
Andreas"
-
### Description
- Type: Enhancement
- Related issue: #4594
- Priority: Major
Since mbed OS 5.5.2 we've marked SPI and I2C as NonCopyable. I understand the reasoning behind this, but it has bro…
-
Does this replace the SI530 ??
Is it a direct replacement ?
What are the advantages ?
### Hardware
* UI Board: mcHF 0.6 or .7
* RF Board: mcHF 0.6 or .7
Thanks,
Chuck WD8BXS