-
Estou obtendo erros na parte dos arquivos relacionados ao processador SAM D21, mesmo após ter instalado todos os pacotes que dizem respeito ao mesmo.
. Below is my configuration:
Group provis…
-
https://github.com/pycom/pycom-micropython-sigfox/blob/69dd8b5d6be5561742aed088ab8f5677668ad3a0/esp32/mods/modbt.c#L1534
Trying to read 16 bytes out of a 4 byte uint32.
I am very uncertain of t…
-
(Quoting last feedback from @fgalan in #81)
> Moreover, with regards to NGSI-LD, are you planning actual modification in the IOTA code itself? > As far as I understand, the NGSI-LD interface toward…
-
https://github.com/pycom/pycom-micropython-sigfox/blob/df9f237c3fc0985f80181c62ba4f4ebd636bfae5/esp32/bootloader/bootloader.c#L71
This array has not been used for a long time, but (don't know why) …
-
Hello
Im trying to build a release of an application that uses Memento.
When running the app with `mix phx.server` everything works as expected.
When I try to create a production release, I get a…
-
I get the error with both firmwares:
* sysname='LoPy4', nodename='LoPy4', release='1.20.2.rc11', version='v1.11-d574024 on 2020-08-25', machine='LoPy4 with ESP32', lorawan='1.0.2', sigfox='1.0.1', py…
-
* Board: Lopy 4 with pytrack
* Firmware: 1.20.1.r2 Pybytes: 1.3.0
* Pytrack Firmware: 0.0.8
I'm using fllowing code segment to sleep specified amount of time and wake up continously.
```
from …
-
Hi Everyone,
I wrote a library to use Telit LE51-868-S in star network instead of Sigfox. The chips are using addressed mode and maximum transmit power.
The two Arrow Smarteverything boards are comm…