-
Hello all,
I'm complete new to 3d printing and also to code and firmware's. I use a Creality Ender 3 pro.
I do want to apologize before for any inconvenience that I'm causing asking this questio…
-
Hello
according to the info i found, need to change the port.
Set "#define SERIAL_PORT -1" and "#define SERIAL_PORT_2 0". Set "#define BAUDRATE 115200"
can you update the firmware to make it work w…
-
Is there an actual, workable solution for people that have the mini E3 V3.0 with an Ender 3 V2 and CR Touch (specifically)? After much research, I am gathering that many people are having similar iss…
-
Hello guys,
i get continuous small pauses in the print when the mini e3 and the tft are connected. It seems like the tft is causing the board to wait for processing and thus making the print pause f…
-
### Description
TFT35 display no longer updates the hot end or bed temperatures from the printer until the print begins.
Machine: Creality Ender 3 Pro
Printer board: BTT SKR Mini E3 V2.0
…
-
Why is no BLtouch support on SKR mini E3 v3.0.1?
-
Can you please compile a firmware for the CR-10S?
-
### Description
Referring to: https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/424
Applying the same fix to the new board I get no display.
Figured to check first before i continue …
-
I have installed software to wifi,and if connect to TFT i can see web interface in browers (have uploaded index.html.gz from here https://github.com/bigtreetech/BIGTREETECH-SKR-PRO-V1.1/tree/master/fi…
-
hey guys,
here is my entry for the microprobe in Klipper, but its not stopping the homing when touching the bed.
the pin is doesnt works and my toolhead crash into bed.
do you have anyone fix t…