-
On a dual carriage, dual extruder printer, I've set the filament temperatures to "First layer: 205" and "Other layers: 220".
I've set "Tool change G-code" to G199, which is my own gcode for parking t…
-
Phil, great work on this. I know very little when it comes to this type of ports, but my realization of how cheap M4 boards have become, are leading me down the path to upgrade me co2 laser to a prope…
-
I'm using a Smoothie 5XC on my delta and have it attached via the Ethernet port. Everything initializes and starts correctly but a few minutes into the print I get the following error.
ERROR] Can't …
-
Hi!
Since the Ethernet connection on my noname 3D printer is nonfunctional USB + Pronterface seems to be my last hope of getting any PC integration and control. When I tried it for the first time h…
otede updated
8 months ago
-
@cope413 commented on [Thu Jan 24 2019](https://github.com/MatterHackers/MCCentral/issues/4910)
-
Hello.
I'm Arthur of the Smoothie project ( smoothieware.org ) and I also sell Open-Source-controller laser cutters ( robotseed.com ).
We've had some users report positive experience with this sof…
-
Hi,
I'm trying to print from SD card slot on my TFT32 but the printing pauses for a while just after it starts or resumes. It does the same all the time, stops and re starts. Of course is impossibl…
-
I was wondering if there is any way of adjusting the jerk settings, the defualt seems too high.
and has anyone figured out how to get more than three point autoleveling?
-
#### Description
Straight after the launching of the CNCjs in the console section consecutively appears "ok" word again and again, as though the CNCjs is sending some command consecutively. Thus I …
-
I opened a [new issue for main line Slic3r](https://github.com/slic3r/Slic3r/issues/4818) to get a new option added to Printer setup screen where we can indicate the fan control signal uses hardware P…