-
If the NTP server I'm using resolves to 4 IPs, then TrueTime will make 4 x 5 = 20 requests. If only one of those requests times out (30 seconds by default), even if all 19 other requests are successfu…
-
I can not get any voltage, ampere, wattage value in any way, what could be the reason for this? I am using it with the following config.
AC POWER 12v 2.2A
SCT013 Current meter
board 1.4rev1
…
-
OS: CentOS Linux release 7.2.1511
```
[Unit]
Description=Prometheus Node Exporter
After=network.target
[Service]
Type=simple
User=root
Group=root
ExecStart=/app/soft/prometheus/exporters/no…
-
Have you had problems with internet connection?
[Jul 12 08:10:17.866] mgos_net_on_change_c PPP: ready, IP 10.161.111.224, GW 192.168.254.254, DNS 89.108.202.21
[Jul 12 08:10:17.870] net_cb …
-
- [ ] Support to `parttool.py` ? or only gen_esp32part ?
- https://github.com/espressif/esp-idf/blob/5ca9f2a4/components/partition_table/parttool.py
- https://docs.espressif.com/projects/esp-idf/e…
-
https://github.com/Wiznet/ioLibrary_Driver/blob/c5be3a85b9799959c87d2e8897682e43c061bbb1/Internet/SNTP/sntp.c#L294
-
### The problem
I am not sure what changed but suddenly all my ESP32 devices report time wrong with -6 hours offset.
On the other hand my ESP8266 device reports the correct time.
I tested this …
-
### Board
Reproduced on LilyGo T18 V3.0 and LilyGo T8 ESP32-S2 V1.1
### Device Description
Just the plain dev modules.
### Hardware Configuration
Nothing connected.
### Version
la…
lptr updated
7 months ago
-
Hi and many thanks for the great component!
As soon as v4 was released, I migrated my configuration to it. Back then I noticed that no readings from sensors were ever received.
I rolled back to …
-
**Printer type** - [MINI]
**Is your suggested improvement related to an existing problem? Please describe.**
This creates a problem because files already on the SD card have the correct time but a…
ghost updated
1 month ago