-
Hi,
I tried these commands:
_from canpico import *
c = CAN()_
Then it raised an error:
**RuntimeError: Cannot put MCP2517/18FD into config mode**
Any insight?
Thank you.
Regards,
Jh…
-
The battery voltage appears in the [schematic](https://github.com/Xinyuan-LilyGO/LilyGo-T-Display-S2/blob/master/schematic/ESP32_S2-Display.pdf) both as VBAT and BAT. Coming from connector P1 it is co…
-
Great project here, really glad I found it. I didn't expect it would be possible to install custom firmware on Tuya devices. What can I do to help add support for the [TS0012](https://www.zigbee2mqtt.…
-
Hi, how are you?
I loved your project, truly awesome! But for my daily use i only need the IGR function. Can you provide the code .ino file with IGR instructions ONLY, and the necessary pinouts for m…
-
Thank you for Open-Frame1, it seems very exciting. I think the PCB ordering process is confusing for new users, so some additional info here would be a big help. The build guide video in the readme do…
-
**Description**
when i use my dualsense controller with the latest version of syscon i noticed the right stick started to drift, i tried calibrating the stick with no luck and now when i connect my d…
-
Is anyone interested in porting FastLED to a Cypress component?
I've recently started working with Cypress's PSoC devices, especially since the CY8CKIT-059 is available for $10 (M3 CPU; the M0-based …
-
I have been using FastLED for about 2 years and think it's fantastic. My current project is to make WiFi controllable multi-LED lights using ESP32 + FastLED + WS2812B lights. That is going well except…
-
Good Afternoon,
Looking at PCBway, getting one of these boards assembled isnt very cost effective. It's comes out at $88, and there are still components to source even after they have mounted the …
-
## The Pololu Zumo SBC
This is my current [favorite SBC for simple robotics](http://www.pololu.com/product/2508). It's what was the basis for my Sumo NodeBot at RobotsConf 2014. It doesn't run Node…