-
The following is in OSPIFBlockDevice.h:
```
enum _mode {
SPI,
SOPI,
DOPI
};
```
and is causing the following compiler error when I try to instantiate an SPI device when OSPIFBl…
-
Hello I have a custom rp2040 based board using MCP251863. I was able to build Micro-python along with the added CAN related code from this repo (except the MIN_PROTOCOL support due to a build error). …
-
Hi,
first of all thanks for your job, I have a problem, on my esp32 wroom, if I uncomment //HelloDrum pad7(6); //mux pin
I got in loop:
rst:0x3 (SW_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
config…
-
I suggest we label GPIO 7-11 with SPI0, for example: `rph_g11_spi0_sclk`.
Then label GPIO 16-21 with SPI1.
I also suggest labelling the chip selects for SPI1 which are currently:
- `rph_g17` fo…
-
I am using tplot() to plot solar wind speed measured by SPC and SPI.
In this plot I want to add another axis which is indicating the spacecraft distance from the sun on the upper side of the figure.
…
-
Is it possible to connect an SPI device to the T-HMI?
If so which pins could I use?
jifop updated
3 months ago
-
Hello. I'm trying to set up ESP Hosted NG.
My hardware is a custom board I developed based on an ESP32-C3-Mini and an Allwinner f1c200s.
I built the latest version of esp-hosted-ng (`b1422af`) firmw…
-
### Describe the bug
root@...-R4:/# echo "help" > /dev/spidev1.0
[ 131.681610] SError Interrupt on CPU3, code 0x00000000bf000002 -- SError
[ 131.681623] CPU: 3 PID: 1306 Comm: ash Tainted: G O 6.…
-
Hello. I bought this display from the Chinese.
![1](https://github.com/olikraus/u8g2/assets/91011821/8695d43f-a538-4305-af75-f9abe9daf273)
![2](https://github.com/olikraus/u8g2/assets/91011821/5c2…
-
Hi
Please can you advice where the SPI pins are.
On the PCB it has printed SCK=io5, MOSI=io27, MISO=io19
How do I physically connect to these pins? I can't see any pin outs on the board with th…