-
Hi,
I recently finished building the bms-8s50 and encountered a problem with the voltage measurement of cell 1. The measurement is very instable. the voltage oscillates by approximately 200 mV and is…
-
[Meridian](https://github.com/qmk/qmk_firmware/tree/master/keyboards/primekb/meridian)'s LED indicator lights won't turn off. Further more, it seems like `rgblight_setrgb_at` can no longer control th…
-
Hi,
I'm using your RPi image for low cost gateway. It boots fine and I would like to test communication with a end device.
I bought some [ST LoRa demo boards](http://www.st.com/en/evaluation-tool…
-
How alive is all this and where could oj2534-hw be found? :)
-
Did anyone was ever able to get it to work?
I just got mine from Altitude. From the lack of support here, it's a shame that they still sell it.
-
Hi for all, I am trying to use this example, but I couldnt it successfully. I got Serial timeout error.( esp32 and stm32 could not talk successfully. ) I have tried everything, powered up stm32 and es…
-
I ran the main.c of the twr_tag_nranges_tdma application. I used 1 tag and 1 node.
I'm getting the expected output.
OUTPUT:
{"utime": 18724444,"nrng": {"seq": 133,"mask": 1,"rng": [1047851887]…
-
**Describe the bug**
A clear and concise description of what the bug is.
When compiling on Linux I get the following error about `_close`, `_getpid`, `_kill`, `_lseek`, `_read`, and `_write` not b…
-
First of all, thanks for the great work!
But since I managed to kill my programmer, I noted that there are a few avoidable failure modes that could lead to the destruction of the programmer and / o…
-
The following code should enable the PWM output on pin PA2:
```rust
let output_green = PwmPin::new_ch1(p.PA2, OutputType::PushPull);
let mut pwm_green = SimplePwm::new(
p.TIM15,
…