-
**Board description (please complete the following information):**
- Name: Can Filter
- Link to all relevant information:
* Documentations
None available because its a "noname" product. I hav…
-
I recently finished assembling a HID2AMI and I am currently in the phase of flashing the firmware. Following the instructions of the guide (for Linux) won't lead to a dfu device recognized by the syst…
-
Looking here https://github.com/zephyrproject-rtos/zephyr/blob/main/drivers/adc/adc_stm32.c#L897, you can see that ADC clock source is hard-coded to `LL_ADC_CLOCK_ASYNC_DIV4`. I'd like to see some con…
-
It's been a while since I've been doing tests using an USB module connected to the PC acting as master and an STM32F105 as slave and with some success. Now I'm trying to use embedded hardware on both…
-
Hello!)
I want use your CAN BUS library on STM32F105, i have board with external crystal 25Mhz, but first i want to test with your example for 8Mhz crystal, and have next error when compiled sketc…
-
Was able to do a factory reset, but found that the POS test app could not run the printer. Also after a reboot it sounds a buzzer and randomly cuts.
I am wondering if you had any issue with the pri…
-
By accident (resp. stupidity) I bought a FDD-UDD U144K.
Looks quit similar, but it's not obvious how the jumpers have to be connected to flash a new firmware. It has got a 7x2 pin header labeled J…
-
I succesfully tested out a bluepill (works great) but ive been trying the Stm32f105rbt6 to no success. Tried thru usart1 and usart2 but get no response.
-
I bought a GD32 device to try out, last year, from LCSC, when there was a shortage of STM32 ics, and completely forgot I bought it.
Do you think it needs specific support added, and would there be …
-
### Description
There some Artillery Genius PRO or X2 that are not able to flash the LCD firmware.
### Steps to reproduce
Try to flash as usual
**Actual behavior**
MKSTFT28.bin is not d…