-
Hello-
We recently attempted to compile this code under CubeMX but failed. The intended chip is the STM32F411. After using CubeMX to generate the project and adding the CherryUSB files our version …
-
Hello everyone,
I am using a custom board for a LoRaWAN-based solution and using this stack for the development.
I'm using the below settings.
```
"APPLICATION":"LoRaMac",
"SUB_PROJECT":"period…
-
The SPI with the R4 is really slow, way slower than with the R3 when running the same clock and the same code.
[SPI_Arduino_Uno.zip](https://github.com/arduino/ArduinoCore-renesas/files/11940035/SP…
-
When used on STM32L4xx platforms (and possibly others), with flash configured for single-bank mode, the EEPROM emulation library miscalculates flash sectors which causes silent erase failures.
The …
-
For the stm32l476-eval, Pin groups G and H exist. This is not reflected in the current hal.
-
Hi David,
Could you provide an example of how to use DMA when your only option is to use `dma::cfg_channel`? My board, the `stm32l476`, does not have access to the `dma::mux` function.
Any help …
-
Currently unable to toggle the pin for the stm32 PG12 pin. My guess is power is not being enabled on port G for the board.
-
**Describe the bug**
I am trying to use HCI_UART (https://docs.zephyrproject.org/latest/samples/bluetooth/hci_uart/README.html) for the controller on nRF52833 DK (https://www.nordicsemi.com/Product…
-
Welche RTC Bibliothek wurde für das Projekt genutzt?
-
Hi, I tried to use Nucleo-L476RG board to port daplink using keil, but failed to get it work
I've tried servial things
- drag-n-drop
- flash hex file by merge bl.hex with if.hex
- breakpoint …