-
**Describe the bug**
Some gpio lines doesn't fire interrupts
**To Reproduce**
Load the Zephyr button sample into a stm32mp157c_dk2.
Press the button and check the serial output for interrupt mes…
-
# Summary
Set up CAN communication between the STM32MP157f-DK2 and a Teensy dev board.
To achieve this, we need to run through some more tutorials on the STM32MP1. So far, we have only run the sta…
-
Hi,
I'm trying to build DirectFB2 with musl-libc for embedded use, but it fails at various points complaining about types and definitions.
I've found some patches fixing similar issues in the [A…
-
Hello in the doc page you can read "is a Linux from scratch distribution"¿Where download the iso?
-
Hi, I used this procedure and after compiling, burned the sdcard.img to the SD card, but the stm32mp135d didn't boot up properly!Here is the exception log:
-
I try execute code with stm32mp1 stm32mp1 (two core) armV7:
I have exeption
Child terminated with signal = 0xb (SIGSEGV)
//=======================================
#include
#include…
-
I have 2 versions of the OrangePi CM4 found here: http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-CM4-1.html running on their image of Debian. 1 has 2…
-
Hi, I can see here: https://github.com/SoMLabs/openst-cube-mx/blob/dunfell/VisionSOM-dsi-rvt70hsmnwc00-emmc/CA7/DeviceTree/VisionSOM-dsi-rvt70hsmnwc00-emmc/kernel/stm32mp157a-visionsom-dsi-rvt70hsmnwc…
Qbicz updated
1 month ago
-
I have been making several tests to validate the use of the MA35D1 to transport very low latency audio (
-
Hello,
first of all thank you for your great work! I've been testing rauc for some days and it almost works flawlessly. Unfortunately when installing a bundle on my embedded system it fails 😟:
``…