-
Hello.
I have one SUN-6K-SG03LP1-EU with one Pylontech 5000 and I'm trying to use this code to read and write from/to the inverter.
I'm having a bit of a hard time understanding how it work as I…
-
All, i have set up (obviously incorrectly) the Device, and when i go to log its getting the data, however when it tries to update the entities it fails, the log script suggested adding a helper but t…
-
Is it possible or will it be possible to write to the inverters modbus registers?
I want to be able to write to: 212 - BATT CHARGE LIMIT CURRENT
Is this in theory possible over the used TCP connec…
-
### You Inverter
Details about your Inverter: Sunsynk 8KW Single Phase - Firmware COMM:E426 MCU:6022-1724
### Describe the issue/bug and what you expect
The total grid import sensor does not …
kloon updated
10 months ago
-
Try to get the test app to work with a Sunsynk/Deye Wifi Data Logger. From what I can tell it connects gets a response by the data is not correct as the message does not look right. Any suggestions wo…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Current Behavior
Almost all values are matched and pulled from the Sunsynk connect portal but there seems to b…
-
### Issue related to
Sunsynk / mbusd Home Assistant Add-On
version d330690 (developer version)
### Describe the issue/bug
after upgrading to this version, quite anumber of battery, inverter…
-
### Describe your feature request
`batteries_rated_discharge_power`
Register: `37009`
**Really helpful for energy management optimazations**
### Proper usage
- [X] I confirm that this is not …
-
Existing sensor definitions can be found [here](https://github.com/kellerza/sunsynk/blob/main/src/sunsynk/definitions.py)
### Your Inverter
Details about your Inverter: Sunsynk 12kW 3-phase, usi…
-
I understand that the automations read the time settings from the inverter to the time data in those tabs and vice versa.
This assumes the values from the inverter are of type `number`. As I'm usin…