-
Recently got some new LYWSD03MMC and after flashing, It shows the last 3 bytes of the mac address after booting, then it shows 129.9C / 99% humdity. I can still connect to it and set the face to be s…
-
Hi! The tool seem to work for me - Thanks
I picked this one as it requires the least amount of wires relatively to the other solutions (other also requires tx rx)
I'm currently trying to read / back…
-
This git page gets updated too slowly. If you are like me you would have gotten frustrated and started testing on your own.
Please share applications, ideas, code or suggestions - lets help them m…
-
Thank you for your tools.
Earlier this year, I made a similar tool, but used a bootloader. [TBXX_Flash_Tool](https://github.com/Ai-Thinker-Open/TBXX_Flash_Tool).
I feel that your practice is v…
-
9:04:34 PM: Searching for devices
9:04:45 PM: NotFoundError: User cancelled the requestDevice() chooser.
9:04:45 PM: Reconnect 1 from 5
9:04:49 PM: Searching for devices
9:05:16 PM: Connecting to:…
-
I was wondering if this issue can stay, or if others are interrested, but can other please share aliexpress links for the TS0201 as showin with the header for flashing etc.? It seems to me that all th…
evlo updated
6 months ago
-
When I receive ZBHCI_CMD_DATA_CONFIRM message I get the following:
hci_uart: 0x3fc97bb0 55 82 00 00 09 2b 02 36 b5 01 0b 00 19 00 32 aa
zbhci: Type: 0x8200
zbhci: (Data Confirm)
zbhci: St…
-
Hello, I have 4 sensors LYWSD03MMC. At the moment I have them connected to the Xiaomi Home application through the ZNDMWG02LM gateway. Can I add them to ESP32 and have them in the Xiaomi Home applicat…
-
Hi,
how hard is it to support firmware for these types of plugs?
I've got a few, with and without power metering.
Basic support for on/off is all I'm interested in the moment, will be willing …
-
After flashing the LYWSD03MMC with the ATC_Thermometer.bin from the Git I recieved strange errors on Telink Flasher (see below).
10:38:07: Connected.
10:38:15: File was selected, size: 64320 byte…