-
**Describe the bug**
I'm getting weird standby temperature readings on my TS100, off by 100+°C.
What's event weirder is that the temperature reading varies considerably based on the input voltag…
-
There are four documented temperature readings starting at 0x9017, Read/Write functions 0x03/0x10:
"Batt Hi temp limit"
"Batt Lo temp limit"
"Device over temp"
"Device recovery temp"
source htt…
-
I am experiencing a strange behaviour with the reported temperature values in Home Assistant via ZHA integration.
Currently we have negative temperatures outside but the reported temperatures are n…
-
**Describe the bug**
I get a KeyError related to line 262 in coordinator.py, when it tries to read temperatures from the JSON response from /api/Panel/GetTemperatures.
As far as I have been able t…
-
https://github.com/ControlEverythingCommunity/HDC1000/blob/80d9141d21ddc549b64cfb1da2253e6b5db39cf6/Python/HDC1000.py#L28
I had to change the line above to:
```py
data1 = bus.read_byte(0x40)
```…
-
Create the ability to read temperature data on a raspberry pi.
- take a temperature reading every hour on the hour.
-
It seems there are a number of issues with the temperatures that stops them from showing except under certain circumstances.
On a new Gigabyte board with a Ryzen CPU, no temperatures are shows - re…
-
New original sonoff sensor (v1.0) is different. (not am2301)
Chip is BB1 0 F 2 G A
Found this:
https://electronics.stackexchange.com/questions/443364/itead-sonoff-rf-wifi-433mhz-switch-identifyin…
-
Hi just wanted to follow up and see if there has been any progress on getting the raw temperature data from this camera?
-
### Ice-Nucleation-Controller version
1.2.14
### Area(s) with issue?
Thermal Camera Evaluation
### Steps to reproduce
Temperatures jump suddenly around -10 degrees
![image](https://user-images…
MadsR updated
9 months ago