-
The official avr-libc lacks support for tinyAVR 1-series (e.g. ATtiny1614), megaAVR 0-series (e.g. ATmega4809) and AVR-Dx series (e.g. AVR128DB28), which makes `avr-gcc` complain when building for the…
-
Is it just by chance that ZL isn't close to 255 when the function is called? It could cause unexpected errors by syncing to the wrong JK transition.
https://github.com/cpldcpu/u-wire/blob/master/fir…
-
There are a couple of ..._write_byte() routines that contain code for writing the signature page, eg,
https://github.com/avrdudes/avrdude/blob/cbac6349b02ae72ec3ed2b345efe8f121d846547/src/jtagmkII.c#…
-
In short, i have an ATtiny1616 (and Atmel-ICE) i could test with,
if someone would do the patch/PR for it.
Given how sparse the supported devices list for the 1-series is, i assume they've been
i…
-
If it's not here, I don't know about it.
1. tiny841, 441, 828 ( the ones with neither hardware twi master nor a USI) are not recognized by wire. **Impact**: Wire.h does not work on affected device…
-
Hello,
I have the following setup : Arduino ver. 2.2.1 / megaTinyCore ver. 2.68. ATtiny402 on breadboard without any other IC, 2 pull-up resistors with value 1K (I do not have higher value) to pin 4 …
-
Hi,
I've just found your great project! Would it be possible to add other chips (looking for Attiny1616 debugger currently)?
Is this project based on reverse engineering the debug protocol or is…
-
I received some new Tiny85 chips from digikey two days ago, and for the life of me I can't get Serial working.
The current state of affairs:
On Attinycore 2.0.0 commit 747d8533b
Part Number: AT…
-
Hi.
I use Attiny3226 on megatinycore. I want to 16 pwm output from PA4 pin. But I am not success it?
Please take sample sets.
Thanks.
-
Hi,
I'm using and attiny 804, and I need to wake up from sleep to power a couple of LED strips (yes, you may have seen a similar code elsewhere). The code is this:
```
#include
#include
#includ…