-
When attached to the serial monitor, the logs are flooded with a print buffer deprecation error, here is an example of the logs from boot (DevEUI, AppEUI, AppKey & location redacted):
```
rst:0x1 (P…
-
### Board
TTGO T1
### Device Description
HX711
### Hardware Configuration
ttgo, wx711 and a rs485 but this isnt used
### Version
latest master (checkout manually)
### IDE Name
Arduino IDE
##…
-
Hello,
I've installed ESP32TinyC64 on my TTGO VGA, it works fine, but is it possible to load .d64 files into it, from the SD card reader? I don't find this mentioned in the doc...
-
Using the Arduino IDE I followed the instructions in the README but there are some issues:
1. The Button2 library is not in the Arduino library manager, you have to download manually.
2. Then the …
-
Bonjour ,
[micropython + lvgl = good]
test axp202_pek_sleep.py
one shoot OK
when try repeatedly , deepsleep wake up with button but with unlimited vibrator.
lightsleep with delay : delay expe…
-
Ability to toggle the oled to save battery life.
I'll be putting mine in an weatherproof enclosure; ideally i'd like it if there's a on/off pin I can use to turn the oled off if the box is open/close…
-
Hi there! I am trying to get the TTGO VGA to be able to use the sd card reader to store more dsk/roms and games. Is this possible? if so, how? Thank you!
-
Got my board today and just tried it. It is working in general.
I got the MQTT Topics into my Smarthome:
setstate MQTT2_phev_ttgo 2021-02-17 17:50:02 responses_1_startMessage_data_1 88
setstate M…
-
Can you add TTGO's T-ETH-POE support?
Board info
https://github.com/Xinyuan-LilyGO/LilyGO-T-ETH-POE
http://www.lilygo.cn/prod_view.aspx?TypeId=50033&Id=1307&FId=t3:50033:3
Example
https://git…
-
I have a TTGO T-beam supreme but I cannot get a sketch working. After uploading it always displays:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x15 (USB_UART_CHIP_RESET),boot:0x8 (SPI_FAST_FLAS…