-
**Is your feature request related to a problem? Please describe.**
ts0601_cover.py needs a new quirk added to support this device properly.
Currently, it pairs with no entities attached.
**Descri…
-
I have a Radiator Valve from Silvercrest/Lidl that isn't currently supported
https://www.lidl.de/p/silvercrest-elektronisches-heizkorperthermostat-zigbee-smart-home/p100335076
It seems to be a reb…
-
Hi,
Getting the following while running the create script on a new Proxmox 8.0.3 server:
root@prox:~# bash -c "$(wget -qLO - https://github.com/whiskerz007/proxmox_tuya-convert_container/raw/mas…
-
Let's use this post to discuss ways to improve the stability of the connection: use a different firmware, rebuild tasmota, etc.
-
below is what dps show when I Query Properties of the device on tuya iot.
> {
"result": {
"properties": [
{
"code": "watersensor_state",
"custom_name": "",
…
-
Message - Expected AP gateway = 192.168.175.1 or 192.168.176.1 but got 192.168.4.1
no connection and cycle through until failed.
Is there a config issue?
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
In trying to write a rule that has the BREAK command, I discovered that BREAK does not function as described in …
-
### PROBLEM DESCRIPTION
Sonoff devices with Tasmota firmware refuse to reconnect after power cycling them. As evident by serial output the devices just says "fails to connect to AP".
The only re…
-
### What happened?
In both control_relay and decoupled modes, the actions remains null on both endpoints L1 and L2 when I activate the switches physically. When in control_relay mode, the relays do …
-
### What happened?
When communicating with a QS-Zigbee-CP03 curtain module I frequently get the following error message:
`error 2022-06-10 07:01:34: Publish 'set' 'state' to 'Store SZ Sued' failed: …