-
I have the following error:
As soon as I connect the Ulanzi TC001 to my MQTT broker, the watch goes into a boot loop.
Restarts every time with the following text:
CHECK
ERR CNCT
I use softw…
-
Here is an image of the Ulanzi TC001 below.
-
# Bug report
## Describe the bug
I have two Ulanzi TC001 devices and I flashed both via Chrome Flash-Tool. Both are working more or less fine in AP mode. I can visited the web interface in AP mo…
-
Hi,
I used iobroker to read the parameter from evcc.
what I found:
evcc.0.loadpoint.1.status.vehicleName is db:1
-> is it possible to change this, maybe evcc.0.vehicle.db:1.title? my Ulanzis show …
-
# Bug report
## Describe the bug
Setting TMODE via MQTT to 0 works but after a period, with no reboots, it defaults back to TMODE 1. Pushing the TMODE 0 via MQTT works and sets it. My experi…
-
Hi James,
on your pictures you are having an attachement gripper, which seems to be generaly usable on the all the "platforms" / animals.
Can you share, what you are using there?
Thanx
-
# 収録環境チェックリスト(riverside.fm用に修正)
* カメラ、マイクが正しく選択されているか確認
* マイクの位置、向きの確認
* ネット環境確認
* ヘッドホンの音漏れ注意
## ゲストの方の収録について
* Backspaceの収録はriverside.fm(リモート収録用サービス)を使って行います。
* 収録30分前にriverside.fmのURLを送ります…
-
**Project description**
I recently received this piece of hardware https://www.ulanzi.com/products/ulanzi-pixel-smart-clock-2882 .
Ideally I would plug it into home-assistant (looks possible https:/…
teto updated
4 months ago
-
# Bug report
The clock in Bucharest shows 08:57 but should be 09:57 according the timezone.
## Describe the bug
I expect to selectthe timezone (like in the original firmware from Ulanzi) an…
w4mhi updated
3 months ago
-
# Bug report
I use two different Awtrix versions on two Ulanzi TC0001 clocks.
The clocks are under control of Home Assistant MQTT, each clock only shows time and on different events ICON, Sound and …
UCaGk updated
2 months ago