-
### Board
[SparkFun Qwiic Ultrasonic Distance Sensor - HC-SR04](https://www.sparkfun.com/products/17777)
### Notes
[Driver](https://github.com/sparkfun/Qwiic_Ultrasonic_Py)
* For XBee/Digi
-
Device Concox X3 with fuel sensor TS01 connected with the tracker via RS232
according to current gt06 protocol when the tracker start sending fuel data from that specific sensor it came as non stop c…
-
Here is python example:
```
import RPi.GPIO as GPIO #Import GPIO library
import time #Import time library
GPIO.setmode(GPIO.BCM) …
-
**Describe the problem you have/What new integration you would like**
Widely used ultrasonic ranging sensors like US-100, JSN-SR04T etc. can work in a serial port mode (Mode2 and 3) which seems…
-
Hi All,
I am working with ch101 sensor along with arduino uno which is giving only one value i.e.,2562.0 as distance irrespective of object at different positions but my concern is to get different p…
-
Hi everyone,
I'm trying to use ICU-10201 sensor without the EVK board. I implemented a specific hardware using a 1.8v regulator as explained in a previous issue. However, I can't make it work. The …
-
Hi!
I am currently working on a project for the Arduino Mini, with an OLED display, RGB LEDs, and a HC-SR04 Ultrasonic sensor. I am currently troubleshooting the code on an Arduino Uno, before upload…
-
Hello
I have an Apollo Ultrasonic Oil Tank Sensor and was hoping to take advantage of the Oil Smart decoder but I seem to be getting slightly different data which means it doesn't get decoded. Her…
-
i have trouble with an ultrasonic sensor hc-sr04, only gets 0:
rr.get_range_inch()
0
it's correctly wired and tested with arduino uno.
the serial is disabled in raspberry pi, inittab and cmdline.txt.
…
-
I tried to read an EV3 Ultrasonic sensor values with LUMPDevice class but I get:
```
Traceback (most recent call last):
File "main.py", line 15, in
OSError: [Errno 19] ENODEV:
A sensor or…