-
Hello,
after the update. The SATIP stream is broken. I find the tuners in DVBviewer but there is no picture. Before the update the system were running.
Here my system
- GigablueUHD UE 4K, 2 x S…
-
OS: Gentoo Linux with 5.10.27 kernel
Driver used: linux_media with allyesconfig (except CONFIG_VIDEO_OV9650=n and CONFIG_VIDEO_OV772X=n because they use __devm_regmap_init_sccb)
Also used the archl…
-
Hi, this issue was reported several times year ago and still persists.
Unicable II (JESS) is not working! It's not a switch problem, it's not cables, etc... it's minisatip.
http://192.168.20.230:8…
-
Hi @Jalle19.
Could you try to give me some hints... I am using my digibit with a Jess unicable 2 from inverto. The Jess options seens to be just fine cause i can tune in all FE. Now the problem is …
-
Hi,
I hav e a VU+ Solo 4K. I also have a Multituner Setup with 8 Unicable (physically its only one) LNBs for Astra 19.2 and a motorized Dish for playing around, configured as Tuner 9 (or "I"). Eve…
-
Hello,
Thank you all for your support and your hard work. I have the following Setup:
TVHeadend 4.2.8
Digibit R1 with Minisatip/0.7.16-axe215 with the config MINISATIP8_OPTS="-P 0 -u 0:1-1420,…
-
Hi,
i have minisatip performance problems with my GigaBlue UHD X3 4K as server.
When i start only one FTA stream to vlc or my other vtuners clients the cpu usage go up to 100% on one core and
the…
-
Hi again.
I can't find the way to configure my Sat>IP server on a Gigablue UHD Quad receiver with an extra PnP tuner.
FBC tuners (frontends 0-7) are using Unicable LNBs:
Astra - Position A
Hotbird…
-
Hi,
I have Vu+ Duo 4K SE with 2 x FBC DVB-S2X.
In web interface of satpi I see that only frontend 0 and 1 are "FBC-Root".
I think that also frontend 8 and 9 should be "FBC-Root".
When I conn…
-
Hello:
I have tried right now version 24-rc1: https://github.com/Jalle19/satip-axe/releases/tag/build24-rc1
Some weeks ago I had a problem with version 23. When I tried to use 2 channels from sa…