-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the component documentation [ESP-IDF Components](https://components.espressif.com) and the issue is not addressed there.
- [X] I am using target and esp-idf v…
-
### Board
esp32 s2
### Device Description
esp 32 s2 mini
### Hardware Configuration
gpio 2-7 are connected to push buttons
### Version
v3.0.0
### IDE Name
Arduino IDE
###…
-
Hello,
I have transferred the pico_sdk_sigrok.uf2 file onto the Raspberry Pico and installed the PulseView version from the Dropbox link provided in the README. I used Zadig to install the USB seri…
-
Dear IntergatedCircuits,
(I have pressed enter by mistake, that was the cause of initial empty issue...)
I put your code on an STM32F103C8T6 board together with USBDevice in Eclipse + HAL projec…
VaZso updated
4 years ago
-
The Heltec V3 comes with the ESP32 S3 which does not seem to be explicitly supported yet. Communication over the USB port utilizes the CP210x so it works. The S3 specifically has an additional USB JTA…
-
Hello,
Does the latest **erpc** support USB_CDC now?
I am trying to add **erpc** to my application. My server-side application runs on STM32 with FreeRTOS. Now it contains USB_CDC middleware a…
-
I see that it is ready to connect a multitude of devices to the usb-host-shield, but something as simple as an arduino echoing its Serial input?, like any device that, when plugged into the USB connec…
-
### Board
Adafruit QT-Py ESP32-S2
### Device Description
Plain board.
### Hardware Configuration
No.
### Version
v2.0.2
### IDE Name
Arduino IDE
### Operating System
m…
-
As the title says and discussed here: https://github.com/raspberrypi/pico-sdk/issues/838#issuecomment-1325602575
Please do not exclude function tud_cdc_line_coding_cb() from file /rp2_common/pico_s…