-
**What happened?**
I tried to get Netbird running.
I started with the advanced installation.
After configuring the vdir for proxy, have the following errors
```
[2024-11-06 17:00:48.902245] [ro…
-
im not even sure what im doing wrong. all i know is that while i can upload code to the rp2040 usb host feather fine, after i have done so i cannot get the serial monitor to work. i tried using putty,…
-
I am testing MIDI driver with MEGA ADK.
malloc() and new fail in the AVR toolchain after version 1.6.12.
- Work: 1.6.2 to 1.6.11
- Not work: 1.6.12 to 1.6.20
However, in version 1.6.11 or earl…
-
See https://github.com/shorepine/tulipcc/discussions/323
Try porting in `usb_keyboard.c` and `midi.c` into Arduino for the esp32s3 example, with a polyphonic midi synth example.
-
Hi i loved this, I only have two questions, i see that this clock works really good specifically for volcas and PO's but if I would want to sync an ios Nanoloop (that can be synced by midi but i think…
-
Hello everybody, I'm new to Pico world, that project looks like the one for me but for a thing, I need to send midi messages on a guitar pedalboard that uses usb type c but only works as a device. Wou…
-
When using a ROLI Seaboard RISE 49 directly plugged to the DD (with v1.2.5 firmware) using a USB-B to USB-B cable (or rather a USB-B to USB-A cable with a USB-A to USB-B adapter), with the DD set to U…
-
Hi.
I own a Yamaha Portable Grand piano that lacks real midi connection and thus been thinking about using an Arduino and an USB Host Shield to convert USB-Midi Midi.
In the device compatibility list…
-
Hi, I was use a Arduino Nano with a duinofun USB Host Shield and program it to send Midi System Message to a Boss Pedalboard GT-1 with succefull, I could send and receive message from the pedalboard w…
-
I don't know if this is true also for the ESP32-S**2** devkit, but for the S3 version there is a hidden pad underneath the board the must be shorted out. Maybe it worth to update the readme. Thank you…