-
Let me start with big thanks to @nisargjhaveri and the contributors. This project has made my day-to-day Android Auto usage a lot simpler and smooth.
I own Hyundai Creta 2019 model. It comes wired …
-
I'm having trouble getting the USB ports to work on my M5P when using the CM4.
As stated in the manual I've added the following line to /boot/config.txt
`dtoverlay=dwc2,dr_mode=host`
when running…
-
I'm using an adafruit feather rp2040. The remapper can pick up the presence of one device but not two; if I plug in a hub with two devices attached only one will register. This applies for both softwa…
-
I am not able to connect any device with lower speed than 480Mb/s, I have hub integrated in touch screen. Is there any way to make it work? On other computer there is no problem
Thx
-
### Describe the bug
Hi, first of all I would like to apologize for cross-posting upstream issues, but I am currently stuck with this [DWC2 issue](https://lore.kernel.org/linux-usb/324b1a66-714d-4bcb…
-
```
What steps will reproduce the problem?
1.Enabled all USB stuff and input devices in menuconfig
2.compiled rootfs
3.compiled uImage
What is the expected output? What do you see instead?
I was expe…
-
**Is this the right place for my bug report?**
This problem started appearing after upgrading from 4.19.xx to 5.4.xx Kernel. Downgrading the kernel to 4.19 restores the USB functionality.
**Descri…
-
### Board
ESP32-S3-WROOM-1-N16R8
### Device Description
Plain module ESP32-S3-WROOM-1-N16R8 in a custom PCB.
### Hardware Configuration
GPIO 19 and 20 are connected to a host USB (PC or…
-
Hello all,
I've been helping users of USB WiFi adapters for some years now and I have noticed that problems are generally first blamed on the driver in use. I get that. However, our USB WiFi adapte…
-
To get the kinect working in a USB 3.0 hub, had to turn off the ability of 3.0 hubs in the BIOS. See if there is a workout for this instead of turning off all USB 3.0 functionality.