-
Add support for USB-PD negotiation to negotiate a higher VBUS input voltage. This will eliminate the need for the external barrel-jack connector.
-
This review references commit 74a4f86f4d4766634681fad2ede5eb32b94be026
This is a high level review only. I did not check specific details (component value selection, orientation, footprint, label n…
-
After updating to 2.21.5d96470 with MacBook Air M2 with a USB-C cable directly connected between the devices, the Pinecil boots briefly, shows a 5.1v level, then crashes and reboots continuously.
T…
-
Seems you don't have the raphnet 3.6 version of the n64 controller(s) dual and single.
I keep trying to play, but some configurations arent working such as Z.
But yeah, mupen64plus 2.5.9 has som…
-
Hi!,
First - thanks for sharing your EFI !
I have problem with USB/TB3 config, and thus - no bluetooth.
My laptop is Dell Precision 5550, i7-10875H.
Looking into IoReg seems that my rig is …
Gobol updated
2 months ago
-
## Introduction
Add a USB-C subsystem to Zephyr that provides a mechanism for developers to create Type-C and Power Delivery applications.
**Requirements:**
- The USB-C subsystem is designed ag…
-
Using some trick such as [this](https://forum.digikey.com/t/simple-way-to-use-usb-type-c-to-get-5v-at-up-to-3a-15w/7016) to simply get 5V 3A from USB-C, and include a simple 5 volt to 3.3 volt regulat…
-
**Edit: Pull Request: https://github.com/espressif/esp-idf/pull/9983 now fixes this. This was due to linenoise thread forever holding the _readlock semaphore, which blocked `esp_vfs_usb_serial_jtag_u…
-
The idea steamed when I was gaming with my backbone controller, I need to turn USB C port to on to play and then remember to turn it off again. Sometimes I forget and realize the next day. It would be…
-
When i try to start the rpi_generic version i get the following output:
```
Raspberry Pi 5 - 8GB
bootloader: 30de0ba5 2023/10/30
update-ts: 1699955031
board: d04170 797932e d8:3a:dd:xx:xx:xx
…