-
VBUS and VIN are both connected to the LDO input, but only VBUS has a diode, if VIN is connected to a lower voltage power supply, say a battery, while USB is connected, current will flow into the batt…
-
Get rid of the word "fix" in the name of the function. Propose changing it to publish_vbus_dev_info or something else.
-
The process of reading vsys and vbus is different between Pico and Pico W. And it's quite complicated.
Add something to the rp2 class?
Basically we need a way to tell if we're running off a battery…
-
Trying to setup DS4Windows and can't install the driver most likely because your website that it's hosted on is down. Can you fix this please? It completely breaks installation.
-
What was VSYS with a boost converter chosen over using the PMID output of the BQ25895? I haven't played with the chip yet and I'm trying to figure out why this might be the case. The only reason I c…
-
**Describe the bug**
I have a Chinese somewhat generic power supply that looks like an "updated PinePower Desktop": it has two USB-A and three USB-C. The last USB-C port supports PD3.1 140 W
With …
-
According to the section 4.5 of the Pico datasheet, when only a single power supply is used for the Pico VBUS and VSYS can be tied together. This eliminates a small voltage drop across a diode in the …
-
My Pinecil V2 will not power on even though the power source I'm using meets the correct specs
**To Reproduce**
Pinecil gets plugged into usb-c1 port on the battery using pinecil usb c cable
**…
-
Finalize the identification of all the CGMES-GridCal conversions
Add all DATA checks needed using the DataLogger
## Objectives
- Multiple Classes to Model the Same Power System Element
- Establish…
-
I know this app was written for the EvKit and not the FTHR but I am trying to integrate this functionality into a FTHR based application. Running the app on the EvKit works fine - it will enumerate e…