-
![EachineE010_Rev2](https://user-images.githubusercontent.com/44196207/102464224-0dba2e00-4087-11eb-8d95-dc56511fb82d.jpg)
Aliexpress link: https://www.aliexpress.com/item/32741187900.html?spm=a2g0…
-
Hi,
currently, the [Pololu 23201a Serial Adapter](https://www.pololu.com/product/126) would cost me about 15€, which would make this project more expensive than the old Spacemouse itself.
Is it …
-
NSGamepad configures the gadget device into a USB gamepad. With the help of a Mayflash Magic NS adapter (about $20), the Pi Zero gamepad can control a Nintendo Switch. See PR https://github.com/milado…
-
I'm going to start a project using several pi zero w with picamera.But I don't kown how to let them capture at the same time Accurately .I have done some tests and several different settings,but still…
-
In the file oled.c, where the clock divide ration and oscillator frequency are initialized with the 0xD5 command. The parameter
in the file is "80", but I think it should be the hex value "0x80". T…
-
Hi, it would be great if you could try it with a DVI PMOD too,
I made a 16-bit version (RGB-565) of the icebreaker-pmod that should be possible to handsolder.
https://github.com/jbilander/icebreaker…
-
First off, thank you @kueblc for picking up the torch on this, and thanks to everyone who contributed in the past, for that is the only way for any of us to Have Nice Things(tm). :smile:
I have be…
-
This is not really an issue, but rather a tutorial.
There is a 6-pin ribbon cable which connects OFDM Board to ESC Center Board:
- On OFDM side, the connector is marked as `CENTER` - see [OFDM boa…
-
Hey,
I use 120 WS2812 wit a 4A 5V power supply (limit 3800mAh). The firmware is 0.8.5 on two different ESP8266 boards. I want to use a self soldered ESP12E board with minimal space requirements. Wit…
-
I'm interested in implementing a Pi HAT, a la https://www.raspberrypi.org/blog/introducing-raspberry-pi-hats/
Ideally this would interface with the classic 8-relay DB-25 internal to the legacy Encore…