-
The Linux kernel supports IPv6 underlay for VXLAN tunnels. It would be nice if EVPN also supported using a v6 underlay (v6 next-hops for EVPN prefixes).
-
I have a ZTE MF281 with LTE.
If the connection is very busy, checkuplink often incorrectly recognizes the tunnel as dead and reconnects.
If the connection is heavily utilized, the latency of the…
-
we have the ENI (that ENI has an ENI_IP, an ENI_MAC, and some tunnel IDs)
now this IP/MAC can be transported over vxlan, over nvgre, over ipsec or something else.
now if the packet has SRC_IP =…
-
Hello! We are interested in SONiC configuration for Broadcom chip. There is an information that L3 VxLAN is implemented in SONiC. We found no traces of L2 VxLAN implementation in SONiC. As far as we k…
-
**Is your feature request related to a problem? Please describe.**
I want to run VXLAN or GRE over UDP tunnel over Hysteria 2. But these protocols're not connection-oriented protocol.
When I set `…
rgwan updated
8 months ago
-
In our current use of Calico's eBPF mode, we have noticed a significant drop in maximum bandwidth—over 50% less compared to when in IPVS mode—for traffic entering the Kubernetes cluster from outside. …
-
### Enhancement summary
It would be great that we could configure the IPv4/v6 services in SVIs, but at underlay network (vrf default, but not through evpn vxlan tunnel).
VLANs/SVIs at underlay net…
-
Running `sudo config vxlan map add nve1 1234 1234` fails with:
```
Feb 23 02:57:38.105541 ixp-lab-sw1 ERR swss#orchagent: :- doTask: Logic error: _Map_base::at
Feb 23 02:57:38.127637 ixp-lab-sw…
-
I have a private internal network for my cluster and dont need any vxlan tunneling.
Would be nice to have an option to disable the tunneling and bridge the priv-eth with the weave-bridge.
-
I set up a Kubernetes cluster using Calico with the following configuration.
* VXLAN mode: Always
* VXLAN port: 4789 (default)
* VXLAN ID (VNI): 4096 (default)
I also configured a VXLAN tu…