-
Have anyone tried to get this working with an ESP32? In my case I have several ESP32-S3-Zero (https://www.waveshare.com/wiki/ESP32-S3-Zero) and trying to replace Wemos D1 Mini with those, but I am hav…
-
Related to #16
❌ https://www.digikey.com/en/products/detail/arduino/ASX00039/21443321
10x8cm, way too big!
. I am hoping that I can adapt the code you already have for …
-
**Current setup:**
Scargarth/Styhead: Raspberry Pi 5, Qt6.8 Demo
MIPI DSI: Waveshare 8.8" with the following Device Tree Overlay
`dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-waveshare-panel,8_0_in…
-
hello
the code does not work without the patch.
how to patch the busio source?
have to take the source code of circuitpython 9, patch and compile a specific version?
is there an other way?
i'm no…
mrbbp updated
4 months ago
-
**Describe the problem you have/What new integration you would like**
The Waveshare 7.5v2 supports partial refresh (as seen for example in this table):
 and tried the following:…
-
Using the latest update on a waveshare with 32gb microsd.
I added some more snaps/tapes to the folders
snapshots - 748 items
tapes - 1296 items
hit 5 to refresh. It says scanning on-scr…
-
### Describe the bug
Solis firmware 4B00 introduces a completely new set of registers for time based control. It also adds a target SOC (and a voltage though it’s unclear what this is used for) to ea…
-
When using the L76X module (in my case, the L76K is mounted), the device cannot be configured with the supplied code. The main error is the usage of the PMTK-Commands whereas the PCAS command format h…