-
J'ai malencontreusement acheté des nanos WAVGAT (https://fr.aliexpress.com/item/32868170637.html) qui apparemment ne sont pas 100% compatibles…
J'ai fait toutes les manips trouvées sur https://foru…
-
Hi ostaquet!
First of all! thanks to sharing your code with the community!
Well, unfortunately, I don't know code in C++ so i can't help too much hahaha, but basically, I'm trying to compile th…
grfbr updated
5 years ago
-
- [x] Programmer/board type: Stlink/v2
- [x] Programmer firmware version: STSW-LINK007 2.27.15
- [x] Operating system: Kubuntu 18.04
- [x] Stlink tools version: 358a91395d957ad626390fbbfcaec065cb49…
-
Hi guys,
Firstly I love this project, I've made a few of these now and they are super handy. Keep it up!
I've run into an issue that I ignored at first, but have since decided I should find a so…
-
The WEMOS TTGO XI 8F328P board uses LED_BUILTIN Pin 12 not 13
could you fix this in pins_arduino.h ?
thanks for you great work btw. !
cyzen updated
5 years ago
-
Can PCF8574 be daisy chained ? Ideally I need 45 ish gpio’s from one raspberry pi I see this version below looks like you can simply plug them together ??
WAVGAT PCF8574 IO Expansion Board I2C-Bus …
-
Hello guys, almost 2 days im trying to make it work without success....I followed everything as described, the floppy is wired to the arduino the right way,it makes some sounds when i powerup the ardu…
-
Does not work with Wavgat Arduino Nano v.3. There are a lot of errors when compiling. Other libraries are compile (for example, NeoPixel).
Arduino Nano: https://www.aliexpress.com/item/WAVGAT-Nano-Mi…
-
avr-g++: error: missing device or architecture after ‘-mmcu=’
/usr/share/arduino/Arduino.mk:1215: recipe for target 'build-wavgat/main.o' failed
how to setup board in Makefile? what must i type …
-
Updated existing hardware (worked fine on 2.4) and flashed new hardware (Wavgat D1 Mini), Both clocks either display all LEDs lit or most lit (nonuniform unchanging unlit pixels). Cannot seem to find …