-
Hello, I am running firmware version 0.1.5. Model GK-200MP2B and I cannot get wifi working. The wifi configuration is saved , but wifi strength is 0%. Any suggestions please?
-
**Describe the bug**
Built the project (everything soldered to the pump unit now), however i couldn't get a stable WiFi connection. Sometimes the Webinterface can be accessed, but most times is wasn'…
-
Hi there,
I run Your code, and it seems to not save credentials.
```
2000-01-01 00:31:14 [info / 106kB] > GET /generate_204 (200 OK) [331ms]
Saving wifi credentials...
2000-01-01 00:31:41 [de…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Description
I switched my remote to a new WiFi and after that started to have connectivity issues between the …
-
Hi,
This hardware configuration is possible with this code ?
```
RS485 devise IN/OUT -> ESP1 ----> wifi ----> ESP2 -> RS485 IN/OUT
|
| modb…
-
The mDNS broadcasting was working fine, and recently it stopped working after latest flashes (still works on devises that were fleshed 3 month ago .
Here is my config
sensesp_app = (&builder)
…
-
When a user button connected to the ESP32 is pressed while the device is powered up, the device is entering "configuration mode".
When the device starts in "configuration mode", it will start the W…
-
### Describe the bug
I got a DFS event, the AP changes channels for the wifi network. Wifi came up fine, but the IP configuration on the 2. network is gone.
Network configuration looks like this:…