-
Compiling and testing your demonstration works well for 7 inches with LVGL 8.3 - ESP-LCD board 3.x.x
Nevertheless, when I add Wifi Connexion, the screen starts scrolling down... alone...
Every few…
-
Hi there, can anyone help me on this? I have tried the recommended setup on Arduino IDE but the demo example is giving me this error.
\.arduinoIDE-unsaved2024931-20716-md7xon.wzo1n\touch\touch.ino:…
-
Hello! I'm using macOS with a custom esp32s3 board. When I connected the usb cable to the serial JTAG, it shows correctly:
However, I cannot use `espflash` to access the board without specifyi…
-
### Board
ESP32S3
### Device Description
ESP32S2 Dev Module
### Hardware Configuration
ESP32S2 Dev Module
### Version
latest master (checkout manually)
### IDE Name
Arduino IDE 2.3.2
### Ope…
-
### Board
ESP32-Wroom32 (ESP32 Dev Module)
### Device Description
Module on breadboard
### Hardware Configuration
DHT20
### Version
v3.0.1
### IDE Name
Arduino IDE
### Op…
-
When running any `espflash` command (e.g. `board-info`) against an ESP32-C6-WROOM-1 I get the following error:
```bash
> espflash board-info
[2024-05-15T10:30:07Z INFO ] Detected 4 serial ports
[2…
-
Hi Koko,
This is about Flipper Zero WiFi Dev Board.
1. I flashed the firmware with flasher script using [this tutorial](https://github.com/justcallmekoko/ESP32Marauder/wiki/flipper-zero). The fl…
-
Hey @lanwin!
First of all, great work. Thank you so much for sharing it with the community!
I found this project and used it to integrate my old Samsung AC into Home Assistant. The AC unit's rea…
-
When uploading a wardive log to wigle.net you'll find that it doesn't recognise any of the data in the file.
So I manually changed a small wardive log to test if I could get it to accept it and it …
-
**Describe the problem you have/What new integration you would like**
Hi,
I would like that ESP-Home manage natively ESP32-H2 device ans use Zigbee with it (use ESP32 H2 with Wifi, BT & Zigbe…